Introduction
Advanced Features
The video below covers the advanced functionalities of the LITTLEmack. Here are the topics covered and their video timestamps:
0:00 - Intro
0:23 - Using Overlays with the LITTLEmack
0:38 - Using Alternate Switch Caps with the LITTLEmack
1:09 - Using an External Switch with the LITTLEmack
1:37 - Controlling Toys or Appliances with the LITTLEmack
Additional Resource Links
Tips and Troubleshooting
LED Light Indicator
The status of the LITTLEmack is displayed via the LED positioned above the record switch. Here are the LED colors and light patterns for each status:
- Red LED
- Flashing, followed by a pause, followed by flashing - the battery is low
- Steady for 1 second - the device is powered on
- Steady - the device is in record mode
- Continuous flashing - a message is being recorded
- Single flash - a message is being played
- Flashing, followed by audible warbled beep - the device's memory has been cleared
- Yellow LED
- Steady for 1 second - the device has no recorded message
- Flashing (while in Record mode) - the device's memory/ storage is full
Battery
We recommend always using regular, alkaline batteries to avoid any issues with recording or playing messages. Batteries labeled “Heavy Duty,” “Industrial Grade,” or “ProCell" handle power differently than regular alkaline batteries, and when used in our devices they behave similar to low or dead batteries.
Make sure your battery is new and recently purchased. Batteries that have been used for other devices or those that have been sitting a while may not have the power to operate the switch correctly.
The video below demonstrates how to install a 9V battery into the device.
Additional Support
Don't Forget to Register Your Product
Registering your product provides you access to ableCARE, product updates, and resources for your product. Click here to visit our product registration page to get started.